Jual Hammer Test Proceq Type N Original Schmidt, Call 0822.1729.4199

Concrete Rebound Test Hammer - Original Schmidt

The quality of concrete is mainly judged by its compressive strength directly affecting the load-bearing capacity and durability of concrete structures. Proceq invented the Original Schmidt, the world’s first and now most widely used test hammer for analyzing the compressive strength of concrete properties.

The Original Schmidt will hit the concrete at a defined energy whereas its rebound is dependent on the hardness of the concrete and is measured by the instrument. The Original Schmidt is available in models with different impact energies. Each test hammer is designed for a specific test application, in order to meet the needs of the customers to investigate a wide range of material types and sizes, such as bridge decks, thin walls, cast stone components or small components.

Features

• Type N Original Schmidt: Rebound values are read from a scale for subsequent calculation of the mean. Compressive strength values  can be read from a conversion diagram
• Type NR Original Schmidt: Rebound values are recorded as a bar chart on a paper strip which has a capacity for 4’000 test impacts
• Type L Original Schmidt: Handling equals type N, but the type L offers an impact energy three times smaller
• Type LR Original Schmidt: Handling equals type NR, but with impact energy three times smaller. The LR also features a paper strip for recording up to 4’000 test impacts without reloading

Applications

• Ideally suited for on-site tests of concrete
• The concrete test hammer is suitable for testing a wide variety of concrete, mortar and rock, but also for testing metal castings
• Handy for difficult to access or confined test areas (i.e. working overhead)
• Assessment on young, soft concrete with mushroom plunger of the concrete test hammer, eg. asphalt strength testing
• It can be even used for underwater applications
• Combining Methods to Evaluate Concrete Strength

Product Variations

• Concrete test hammer SilverSchmidt Type ST N - Standard impact energy (2.207 Nm)
• Concrete test hammer SilverSchmidt Type ST L - Reduced impact energy (0.735 Nm)
• Concrete test hammer SilverSchmidt Type PC N - Standard impact energy (2.207 Nm) with PC communication, increased memory capacity and Hammerlink software
• Concrete test hammer SilverSchmidt Type PC L- Reduced impact energy (0.735 Nm) with PC communication, increased memory capacity and Hammerlink software

The following standards can be applied to the concrete test hammer:

• EN12504-2 (European Standard)
• ASTM C 805 (North American Standard)
• JGJ/T 23-2001 (Chinese Standard)

Technical Data

Mechanical data	Type ST N / PC N concrete test hammer	Type ST L / PC L concrete test hammer
Impact energy	2.207 Nm	0.735 Nm
Hammer mass	135 g	135 g
Spring constant	0.79 N/mm	0.26 N/mm
Spring extension	75 mm (2.95”)	75 mm (2.95”)
Housing dimensions	55 x 55 x 255 mm (2.16” x 2.16” x 9.84”)
Weight	570 g (1.3 lb)

PC application
Only for the concrete test hammer SilverSchmidt versions PC N and PC L: Hammerlink Software

Electrical data
Display	17 x 71 pixels; graphic / alphanumeric
Power consumption	~13 mA measuring, ~4 mA setup and review, ~0.02 mA idle
Battery life	>5000 impacts (before recharging)
Charger connection	USB type B (5V, 100 mA)

Measuring ranges
Concrete compressive strength	10-100 N/mm2 (1450-14500 psi)
Operating temperature	0 to 50 °C (32 to 122 °F)
Storage temperature	-10 to 70 °C (14 to 158 °F)

Informasi Harga Terbaik, Stok dan cara pemesanan silahkan hubungi :
Marga Setia / TantanTeknik
Alamat : Jalan H.Kelik 20 RT.03/RW.08 Kelapa Dua
Kebon Jeruk Jakarta Barat
Phone : 082217294199 – 082112325856
WhatsApp : 082217294199
Telp dan Fax : 021.22054159
Email : atantan.margasetia@gmail.com